Exmark M216KA User Manual download pdf (Page 10)

77-0500

82-9152

98-8017

104-1329

104-8585

Assembly

Note: Determine the left and right sides of the machine

from the normal operating position.

Installing the Handle

1. Mount the handle to the outside of the lawn mower

housing (using the bottom hole) with 2 5/16–18 x

1–1/4 in. cap screws, washers, and thin nylon insert

locknuts.

2. Secure the handle latches to the handle with 2 cap

screws (5/16–18 x 1-1/2 in.), washers, and nylon insert

locknuts (Fig. 1).

m-534

Figure 1

1. Handle latch

2. Bag support rod

3. Cap locknut (2)

4. Handle

Note: You can adjust the handle height for comfortable

operation. Stand behind the handle to determine the

height. To adjust the handle height, position the cap

screws and the locknuts that secure the handle latches to

the handle into the other mounting holes in the latches.

3. Slide the bag support rod through the second from the

top mounting holes in the handle and secure each end

with a cap locknut (Fig. 1).

4. Use a cable tie to secure the control cables to the left

handle below the bag support rod.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

No comments

Exmark M216KA User Manual Page 10