Exmark eXmark Ultra VAC Lazer Z User Manual download pdf (Page 14)

- 9 -

3.5 Install casters to front of deck using appropriate

hardware from the bolt bag (eight 3/8 x 3/4" bolts

and eight 3/8" whizlock nuts); tightening the lower

four bolts first, then the top four.

3.6 Loosen the 5/16" hardware at the two (2) discharge

deflector hinge points so that the deflector is snug,

but can be moved up and down freely.

3.7 Mount the fuel tank on the tank support.

Apply retaining adhesive Fel-Pro Pro-Lock ‘Retaining Type I or

Retaining II’ or Loctite RC 609 or 680 on the two threaded

studs from the bolt bag and install into the two left holes

underneath fuel tank. Install the fuel tank on top of the

fuel tank support with the studs going through the slots in

the support. Install two 5/16 x 3/4 screws with a 5/16”

flatwasher and 5/16” lockwasher into the threaded holes in

the right side of the fuel tank.

Do not over tighten

. Place

a 5/16” flatwasher, then a spring, and a 5/16 nyloc nut over

each of the studs. Completely tighten nyloc nut then back off

a 1/2 turn. This will allow for normal fuel expansion and

contraction with changes in temperature and fuel levels.

Do not over tighten

3.8 Install Handle Assembly

Position the lower end of the handle assembly on the

outside of the upper rear section of the fuel tank &

handle support. Install one 3/8-16 x 1" bolt (from

the outside in) in the upper hole on each side of the

handle.

Loosely secure each screw with a 3/8" nyloc nut. The

handle can now be pivoted to allow positioning in one

of the three holes allowing various adjustments for

operator comfort (See Figures 1 & 2). Once a proper

position is found, install one 3/8 x 1" bolt in the

bottom mounting holes on each side of the handle.

Secure each bolt with a 3/8" nyloc nut. Tighten all

hardware.

FIG. 1

UPPER HANDLE MOUNTING

IMPORTANT: If the mower has been

completely assembled

and

the handle position

changed

, it will be necessary to

readjust the drive and brake linkage.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 43 44

Comments to this Manuals

No comments

Exmark eXmark Ultra VAC Lazer Z User Manual Page 14

Comments to this Manuals

Related products and manuals for Lawnmowers Exmark eXmark Ultra VAC Lazer Z