Exmark eXmark Ultra VAC Lazer Z User Manual download pdf (Page 24)

- 19 -

Close fuel shut-off valve if machine will

not

used for a few days; when parking inside a building;

or when transporting the unit.

4.3.4 Drive Lever/Neutral Lock/Park Brake Latch Operation:

To lock the drive levers in “neutral” squeeze the drive

levers back to the neutral position. Place thumbs on the

upper portion of the neutral lock/park brake latches and

move them to the rear. Release drive levers (See Figure 12).

To lock the levers in “park brake”, squeeze the drive levers

back to the brake position. Place thumbs on the upperportion

of the neutral lock/park brake latches and move them to the

front. Release drive levers (See Figure 12).

To place the drive levers in the drive position, firmly hold

the drive levers, place thumbs on the upper portion of the

neutral lock/park brake latches and move them out of the

“neutral” or the “park brake” position.

Slowly

and

smoothly

release the drive levers.

4.3.5 Drive Wheel Engagement and Turning:

With drive levers in the “park brake” position, shift

transmission into desired gear. Squeeze both drive levers

and move both neutral lock/park brake latches from the “park

brake” position.For straight ahead motion, smoothly release

both drive levers to engage drive wheels.

Squeeze right hand drive lever to turn right and left hand

drive lever to turn left (See Section 4.1.2).

4.3.6 To Stop:

Squeeze drive levers all the way back to engage brakes.

Move neutral lock/park brake latches into the the “park

brake” position and shift transmission into neutral.

4.3.7 Blade Engagement:

•

••

•

DO NOT

put hands or feet under the mower

or mower deck when blades are engaged.

Be sure

that all persons are clear of mower deck and

discharge area before engaging the blades. Set throttle

to "midway" (half throttle) position. Push the blade

engagement lever forward to engage blades. Accelerate to

full throttle to begin mowing. (See Section 4.1.5).

4.3.8 Blade Disengagement

Pull the blade engagement lever to the full rearward

position to disengage the blades (See Section 4.1.5)

4.3.9 Changing Gears

When changing gears,

always

squeeze drive levers and/or

engage neutral lock latches or “park brakes”. The shift

lever may be moved with a knee or by hand.

NOTE: Reverse gear is reverse assist only, the operator must pull

the unit backwards.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 43 44

Comments to this Manuals

No comments

Exmark eXmark Ultra VAC Lazer Z User Manual Page 24

Comments to this Manuals

Related products and manuals for Lawnmowers Exmark eXmark Ultra VAC Lazer Z