Exmark eXmark Ultra VAC Lazer Z User Manual download pdf (Page 32)

- 27 -

Refer to the charts and illustrations on the following pages

to properly adjust for desired cutting height.

FIG. 14 FIG. 15

CASTER HEIGHT ADJUSTMENT AXLE HEIGHT ADJUSTMENT

These models have five (5) axle positions; four (4) 1/2" caster spacers;

one (1) 3/16" caster spacer, and four (4) blade spacers.

Pos. A

Pos. B

Pos. C

Pos. D

Pos. E

Axle Pivot Bolt

Axle

Adjustment

Holes

Place Jack

Here

Axle Adjustment Holes are actually

in the side of the rear deck.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 43 44

No comments

Exmark eXmark Ultra VAC Lazer Z User Manual Page 32